If you click on any link on MavSoho.com & decide to buy it, we may earn a small commission. Read More Here
Do you find that your shower head is covered in calcium deposits? Well, don’t worry. You are not the only one! In fact, it’s quite common for calcium to build up on shower heads and produce a hard water buildup.
The good news is that there are many steps that you can take to remove this calcium deposit buildup so you can get back to enjoying your shower experience.
This article will share easy steps on “how to get rid of calcium deposits in the shower head” with vinegar to remove them with baking soda.
If you’re planning to grab a fancy LED shower head then we will suggest you read our guide on it.
Steps On How To Get Rid Of Calcium Deposits In The Shower Head
Step 1: Collect Your Supplies
First, you will need to gather all of your supplies for removing calcium deposits. You may want to start by purchasing a bottle or two of vinegar and baking soda at the grocery store.
You’ll also need an old toothbrush (or some other stiff-bristled brush), dish soap, nylon bristles scrubber pads, and rubbing alcohol or white vinegar in addition to any other natural products that you might have on hand like olive oil or lemon juice.
Next, find a roomy bucket with plenty of water in it so that you can rinse items off as needed throughout this process. Finally, grab an old towel from the laundry pile -you’re going to be getting wet!
Step 2: Remove Your Shower Head
Then you have to remove your shower head. You can unscrew the flow-control valve on top of your existing single or dual shower head and remove it from its base, or you may be able to unclench a compression nut at the end of the pipe by using pliers.
Step 3: If You Can’t Remove The Shower Head
If you can’t remove your shower head, then fill your Ziploc or hefty zip bag with vinegar. Tie a knot in one of the top corners to seal it off, and then slip this over your shower head.
Steps 4: Remove The Bag
After a couple of hours (overnight is even better), you can remove the bag and clean your shower head. Use water to rinse away any vinegar that remains; it should be easy at this point because there won’t be much calcium left on the surface!
Step 5: Clean Your Shower Head
So at the final step, rinse off your shower head with water and then use a toothbrush to get in all the nooks and crannies.
If your shower head is still not looking great, you can try using CLR or some other calcium remover product on it again as directed by the package instructions.
Step 6: Reattach Your Shower Head
If you have removed your shower head to complete these steps, then you have to put it back on!!
Finally, don’t forget to turn your shower head on and check for any calcium buildup. If there is, then start over again!
After a day or two, you should be able to spot if the steps have been successful- just make sure that you keep up with them every month or so because calcium deposits will inevitably.
If you’ve been looking for a way on how to get rid of calcium deposits in the shower head, we have some great tips that should help. We know it can be frustrating when your hard water starts leaving spots on your tile or soap scum is building up and making everything look grimy.
You’re not alone! One of our blog readers commented that they are tired of spending hundreds on cleaning products every month just to keep their bathrooms clean.
The good news? There are plenty of ways to remove stubborn stains without having to break the bank with harsh chemicals! Here are three steps we recommend getting started with today: 1) Use vinegar – White distilled vinegar will work best because it has no color or scent but any
I am a full-time professional architect who is passionate about all kinds of stuff design and construction. Now I share my advice and experience in the architecture and home improvement industries. In MAV SoHo I recommend the best shower heads to help you achieve your goals and simply get the job done at an affordable cost.